In short
Blinking sensor light, door reversing, or a door that only closes while you hold the wall button: all three point to the photo-eye sensors. Clean and realign them first. If that doesn't work, call, and a technician in Larchmont repairs the sensors and re-tests the opener's safety system.

Doors that won't close in Larchmont
In Larchmont Manor, close to the harbor and Manor Park, salt air off the Sound corrodes sensor brackets and connections, and some low garages have taken on water in storms. The Manor's Victorian and shingle-style houses often have old carriage houses with uneven floors. In Larchmont Gardens and the Sheldrake area, the brook floods in heavy rain, and sensors that sat in water should be replaced. In the unincorporated area and near the village center, 1920s houses have narrow garages where sensors sit at bumper height. Street trees throughout fill the doorways with leaves each November.
What it means when the door won't go down
Every opener made since 1993 has two photo-eyes a few inches above the floor, one on each side of the door. If the beam between them is broken, or the opener cannot tell whether it is, the door will not close from the remote.
- Blinking sensor light: the eyes are out of line or one lens is dirty.
- Both lights off: no power to the sensors, usually a wire pulled loose or chewed.
- Lights steady but the door still reverses: the problem is the close limit, the force setting, or something binding in the track.
What you can safely try yourself
Clear the doorway, clean both sensor lenses, and check that the two sensors point at each other at the same height. A steady light on each side means they can see each other. If one keeps blinking after that, or the wires look damaged, leave it for the technician.
Never disconnect the sensors or move them up out of the doorway to get the door working. They are what stops the door from closing on a child, a pet or a car.
How the repair is done
The technician tests the sensors and their wiring, realigns or replaces them, then checks the close limit and the force setting. Before leaving, the door is tested on a block of wood laid flat in the doorway: it has to reverse as soon as it touches it. If the door itself is binding in the tracks, that is corrected too, since a stiff door is often what set the opener off in the first place.
Around Larchmont
- Unincorporated Larchmont: Town of Mamaroneck streets toward Weaver Street and the reservoir, mostly colonials and Tudors.
- Sheldrake area: Streets near the Sheldrake River, where flooding and damp affect garages.
See the full Larchmont service area.